Food Processor vs Blender

If you cook in a small kitchen, obviously space is going to be at a premium and you may be tossing a coin as to whether to invest in a blender or a food processor. So , food processor vs blender; what’s the difference? And which should you choose? Or do you need both?

As it turns out, if you are anything other than a basic cook, you probably need both. This is similar to gardening where you need a fork for digging and weeding, but you need a potato fork – which looks similar, but has wider tines – for digging and lifting potatoes. They are both forks, but designed to do different jobs. Neither is made to do the job of the other.

Basically a blender is used for soft foods and liquids while a food processor is used for chopping, grating and generally pulverizing hard foods – carrots, parsnip, potatoes and so on.

Not only that, but a blender will not do the job of a food processor, while a food processor can make a right royal mess of liquids.

A food processor has a much wider bowl or container than a blender. When a knife just doesn’t cut the mustard, it’s time to get out the food processor. It will chop onions, mushrooms, swede, cabbage, etc., into tiny little bits for use in soups or, say, a meat loaf. It usually also has different blades for grating and for making dough. You might find that some pieces of food stick to the sides of the processor where the blades cannot reach them, so you may have to stop and scrape them back into the center of the bowl with a knife or spoon.

What it is not so good at is liquids. OK, you can use a small amount of liquid, but if you try to fill the bowl it will squirt out and you will find yourself with a big clean-up job just when you don’t need it right in the middle of food preparation.

Here’s a very quick recipe for a chilled yoghurt. Take some frozen fruit and chop it in the food processor. Add some yoghurt. Add sugar or a little sweet fruit juice to taste. Give it a whizz. And that’s it.

The blender, on the other hand, is pretty feeble at trying to chop up vegetables and so on, but comes into its own when making soups, salad dressings, smoothies and the like. You can fill it to the top and it will be fine – just so long as you remember to put the lid on it.

One danger to be wary of when using a blender is if you are mixing very hot liquids. If you leave the center piece of the lid on top it is possible, believe it or not, to create an explosion because of the steam. Remove it and cover with a kitchen towel or teacloth.

So food processor vs blender – which to choose? If you are on an extremely tight budget, then the food processor is the more versatile, but ideally you should have both.

Top 10 Ways to Save Money Buying New Appliances

appliancesIf you need to buy a new appliance to replace your old one, buy someone an appliance gift, or buy the essential appliance to set up your new home, there are some ways help to save more money on these appliances. Every dollar we can save can be used to buy other essentials for your family, which can help to control the family budget. The following top 10 ways can make you become a frugal shopper and save more money for you.

1. Buy Energy Efficient Appliances

Even if some appliances are less expensive than others, you also need to consider how to keep the operating costs as low as possible. If the one you bought is less efficient, you will pay the price soon or later. Therefore, when it comes to buy a new home appliance, saving on operating costs is very crucial. A good way is to choose an energy star appliance or one appliance that is very energy efficient.

Not all appliances are Energy Star appliances or included in other energy efficiency programs. However, the fact is that some appliances are indeed more energy efficient than their competitors. Therefore, it is highly recommended to compare energy guide labels and this can help you get the most energy efficient appliances.

Some appliances, like dishwashers, refrigerators, washers and air conditioners, meet stricter energy targets and they are also CEE Tier listed, which means they can save more energy. Actually, you can do more to reduce operation costs after the purchase.

You also can take advantage of Energy Star or other energy efficiency appliance rebate programs in many areas. You can get some money back on buying new appliances. It is really good, isn’t it?

2. Cut Appliance Frills but only Go for Function

Some frills on some appliances are essential. For example, the programmable setting may be very important for a coffee maker, because it is an essential for your own lifestyle. If you are on time-of-use electricity rates, the delay start on your washer can help you extremely cut your energy bill. However, there are also many useless frills on many appliances. Since you never use them or seldom use them, why do you need to pay for them? Therefore, only go for function but not the glam.

Of course, appliance prices are influenced by these useless frills. If you have avoided these bells and whistles they have, you can reduce your budget to buy an appliance that really matters to your life. For large appliances, the colors are also very important. Even if the most trendy colors will become outdated, so you can buy white appliances that will never date.

3. Say no to Expensive Maintenance Costs

Some appliances require expensive maintenance costs. These appliances include purifiers, humidifiers, dehumidifiers and air cleaners. Maintenance costs are very pricey. For example, if you need a water filer for your family, you can choose some washable or permanent types of water filters. However, this doesn’t mean you need to sacrifice efficiency. If your water is pretty dirty, a high-end water filter that needs to replace filters is also highly recommended.

Reverse osmosis water filters are pretty expensive, but they really can get rid of many types of contaminants in our water. However, their replacement water filters are pricey. HEPA Filters are also pricey to replace, but some models offer permanent HEPA filtration. You can try to find them.

For air purifiers, the efficiency certification is the CADR rating that you can find on its packaging. This implies the air purifier you choose is more efficient than others. For air conditioners, you can check the Energy Efficiency Ratio.

For vacuums, a bagless system can help you save more money. If your vacuums is not a bagless vacuum, you need to buy vacuum bags which cost you about $10- 15 for 1 package. A bagless vacuum can help to save this money and you don’t need to try to find the right bags for your vacuum all the time.

Extended service contracts for new appliances are not always good or bad. If the appliance needs to be repaired, it can save money for you later.

4. Free Shipping or Delivery

Free shipping or delivery is not always offered by retailers, but free shipping can really help to save money, especially for large appliances. If it is offered, it is better or you can negotiate free shipping for large appliances.

If you need to buy a new appliance to replace your old one, you also can negotiate the removal of the old one. Some local retainers can offer this kind of service. If you deal with the old one yourself, you may need to pay some money. This is because most landfill sites require tipping fees.

You also need to negotiate the set-up as well, which is also a time-consuming thing if you are the first time to buy this kind of appliances.

5. Choose the right size

You should avoid choosing overly large sizes or capacities which are designed for a large area. We tend to buy large refrigerators or freezers that sit half empty and occupy much kitchen space. What’s worse, the big size means it will consume more electricity than you think and you need to pay more on your energy bill.

For humidifiers, if you choose a unit that can humidify an area of 500 sq. ft. but your room is less than 100 sq. ft., it is really over-sized. You need to pay more money and this may result in excess moisture problems. Over-sized air conditioner is also a waste of money and energy.

Before buying an appliance, you really need to measure you room and know whether the appliance is designed to cover such a space, which can avoid wasting money and energy.

6. Dent & Scratch Appliances Can Save You Money

Many appliance dealers may have some appliances with some minor scratches or dents. Most of them are on the route from manufacturers or just sitting in the showroom. First, you need to judge whether such dents or scratches matters to you. And generally, you can negotiate a pretty price. When buying them, make sure all the damage is only superficial and doesn’t influence the performance.

7. Watch and Wait for Appliance Sales

If there are some big sales events (like Christmas or Black Friday) around the corner, you should be patient and looking for great deals on the appliances you plan to buy. Sometimes, you also can get more savings by purchasing an appliance after or at the end of its typical season. When buying something, you need to avoid compulsive purchasing.

8. Buy Trusted Brands

Some people tend to buy cheap appliances but don’t care about brands. However, trusted brands mean dependability and reliability. Cheap low-quality products will cost you more than you can imagine, because you may need to repair them too often. Trusted brands also mean you can get parts easily when you need to fix them. Some low-quality brands may disappear very soon and you may not find the right parts to repair the appliance you have bought. In the end, the only way is to buy a new appliance to replace the broken and irreparable old appliance.

9. Multi-function is better than singe-function

Well, not all appliances have multi-function. However, you can find appliances that feature multifunction. This means one appliance can perform several functions, so you don’t cost money to buy several appliances separately. They can help you save more money and don’t get your kitchen clutter or counter top a mess.

On the other hand, if you only need to use the primary function, you don’t need to cost much to buy a multi-function model.

10.Buy Outdated Appliances

If manufacturers start to promote their newer upgrades, this also means outdated appliances will become very cheap, because they want to clean the old appliances inventories. Sometimes you only need the primary function, so you never need to cost much to buy a new updated version.

Best Gate Alarm

If you have a swimming pool and have installed a pool alarm, you also need to install a gate alarm. Both gates and pool alarms are highly recommended to use together, because this means more layer of protection for your kids and pets. Although they are not lifesaving devices, they are able to alert adults to a happening accident, which can give parents more time to react. On the market, there are plenty of gate alarms and this list of top 5 best pool alarms were chosen due to their effectiveness, ease of use, ratings, prices, as well as customer reviews.

Smartpool YG18 YardGard Programmable Gate/Door/Window Alarm

Smartpool-YG18-YardGard-Programmable-WindowThis best gate alarm is the most popular and top-rated model on this list. Once your gate is opened only at 1or 2 inches, it will alarm immediately, help you not miss any chance to find what is happening near your gate. It comes with a second reset button which allows you to place on the inside of your door or gate. If you want to go out, just press the button, and then go out, but the gate alarm will not be triggered. Its main unit is installed on the outside of the door or gate. If someone tries to entry, a 4-digit pass code needs to be input, or the alarm will be triggered. Therefore, if strangers or your children are not allowed to entry, they will not know the pass code. This feature is only exclusive on this device.

Pool Patrol PA-30 Pool Alarm

Pool-Patrol-PA-30-Pool-Alarm-300x300This model has the lowest sound level on this list and it has a 6-second delay. We make it on our list due to its impressive siren design. It is the only model that has both a siren at the gate and an in-home siren. Although it has a lower sound level, you will find it is so easy to be heard. Plus, it also allows you to make it delay for 15 minutes. This feature is helpful especially you need to open your gate for a long time. For example, you need to move lawn furniture into your backyard.

PoolGuard Pool Door & Gate Alarm with Transmitter

PoolGuard-Pool-Door-Alarm-TransmitterThis best door alarm comes with an indoor alarm with DAPT, and an outdoor alarm with DAPT. Both the DAPT and GAPT offer a 7-second delay, which can be helpful to avoid accidental alarms. It performs well and it is also the loudest model on this list, so you will not miss any alarm.

Safety Turtle GA101B Wireless Gate Alarm

Safety-Turtle-GA101B-Discontinued-ManufacturerThis model is the only gate alarm that doesn’t offer a siren at the gate. It does come with an in-home siren. It also allows you to buy several base stations in order to expand the system. If the battery is very low, it cannot work effectively. Therefore, you need to check its battery. It offers 2 ways to do that. You can press its bypass button to make it run for a test, or you just place it in the test mode. However, it is also the most expensive models on this list. The Safety Turtle Wristband alarm and Safety Turtle gate alarm are able to be paired to work, so they can alarm the same base stating, offering more protection.

Techko S187D Safe Pool Alarm

Techko-S187D-Safe-Pool-AlarmIf you need a cheaper gate alarm, this Techko S087 is a good choice. However, it seems a little complicated to install. It offers nylon straps to secure its magnetic switches, but these traps don’t fit the gate very well. Therefore, it is not recommended for those who don’t like DIYing. Well, it is really cheap.

Why You Need a Pool Alarm

poolalarmtakegoodcareofkidsMaybe everyone dreams of having a swimming pool, because it is really a luxury. Pools are a good water to exercise and also helpful for relaxation. These benefits are obvious, but some dangers cannot be neglected. If you have a pool, one thing is essential to avoid these dangers. Pool alarms are designed to deter these dangers. Some people think such a pool alarm is not needed, but owning such an alarm has many benefits. In the following, we will discuss the benefits that a pool alarm can offer. And you will find you have enough reasons to invest in such a pool alarm.

Protect Children

If you have small children, how to prevent your children from entering the pool is very important. And a pool alarm can effectively protect your children. Some studies show that pool accidents are one of the main causes of children’s death. If children fall into your pool and no one notice what happens in the pool, the children will die. If you install a pool alarm, it will sound a loud alarm once your child falls into the pool. This can give you enough time to react and your child can be saved as soon as possible. Even if you don’t have small children but you live in a neighborhood with some small children, installing a pool alarm is also helpful to prevent them from entering your pool.

Protect Pets

If you have pets, you also need to prevent them from getting drowned. Sometimes pets may fall into the pool and get into trouble. In this situation, if we don’t know the situation, we cannot go to save them. Some poets know how to swim when they were born. However, some pets also cannot swim. If they carelessly enter into the pool, a pool alarm can find them and sound an alarm as soon as possible. Therefore, you can know immediately and react immediately.

For Liability

Owing a pool has many benefits and we buy or built it for our personal use. However, sometimes, kids will be kids and they may access to the pool without permission. If there are some accidents happening in the pool, we are liable. Even some adults may don’t know their limits and they insist on jumping into the neighbor’s pool. If there is an accident, our judicial system will judge we were liable. To prevent any injuries or drowning in our pool, owing a pool alarm is a wise decision. Such a device can protect our property and prevent us from related legal disputes.

Cut Insurance Costs

For every family, the homeowners insurance is a must have. We cannot avoid having the insurance, but we can determine what we need to pay for insurance. Insurance companies will check every aspect of your house and determine what kinds of insurance you should buy. If you have added a pool alarm, you can effectively cut down some insurance costs.

Why you need a dehumidifier? 5 signs can tell you more

Frigidaire-FAD504DWD-Energy-50-pint-DehumidifierMaintaining a proper humidity level indoors can be helpful for our health. If there is only a little humidity in our home, some discomfort problems will happen, like chapped lips, cracks in our wooden furniture, etc. However, this doesn’t mean too much humidity is better. On the contrary, too much moisture can cause other issues, like promoting the growth of mold and mildew, leading serious health issues. For these reasons, if the humidity level is very high indoors, you really need a dehumidifier to help you remove excess moisture from the interior air.

Before deciding to buy a dehumidifier, you should know the humidity level. This is very easy, the only tool you need is a hygrometer which can help you accurately measure the humidity level. Once you know the level, you can know whether you need a humidifier or a dehumidifier. Such a hygrometer is a very useful instrument for measuring the home moisture. Generally, Optimum Humidity Zone is between 40% and 60%. If the relative humidity level is over 60%, you need a dehumidifier. If the level is lower than 40%, you need a humidifier to add humidity.

Some people only need a dehumidifier at certain times of the year. For example, when there is plenty of ground water runoff in spring, the humidity level increases and a dehumidifier is essential, while during other seasons of the year, it doesn’t need one. On the other hand, other people may need one to maintain a proper moisture level all year around. Sometimes, we only need a dehumidifier to reduce the humidity level in one room, or in a corner, or in one area in the home, so a small and compact model is also useful.

Once the high level of moisture is detected, the first thing is to turn off any humidifier or remove anything that can cause the humidity. And then, we need to do something to remedy the situation. In this article, we will discuss the most common signals when the humidity level is high and such a dehumidifier is essential to use.

1. Condensation is found on the patio door or windows.

If you discover water beading on your window, a vapor or fog on the glass, or condensation on the interior glass, it probably means the humidity level is very high due to a large amount of moisture in your room.

If you use a large humidifier, this may happen and it will output too much moisture in the room. This is not a good thing. Moisture will build up on a window and finally becomes liquid water that will rot wooden casings. What’s worse, wetness will promote the growth of mold. You will find some dark or black grunges in the track of the door or on the bottom of window trims. These grunges are caused by mold.

Firstly, you need to turn off any humidifier immediately and then you need to downgrade it to output less moisture in the future. If the high moisture is caused by the large output, you just stop it and open your window to allow fresh air to enter your room and the moisture level will be remedied as soon as possible. However, if other things cause a high moisture level, things seem to be a little complicated and not easy to correct. For example, humidity present in the construction materials can also increase the moisture level. In these situations, proper room ventilation is very important.

Some indoor moisture problems are caused by outdoor climates. For example, if it rains for many days, your room will have a high humidity level. And a dehumidifier is effective to reduce the humidity level.

2. Mold Spots are found in corners of the walls or on the Ceiling

As vapor rises, mold spots are often found in the corners of the walls or on the ceiling in the bathroom because of these bathroom moisture problems. This is because bathrooms don’t have enough fans to draw out steam and draw in fresh air from the outdoors. Therefore, bathrooms often have problems of mold.

Mold can easily grow almost anywhere, like on the ceiling, on the wall, around/under the toilet, or behind the bath. Some moisture problems are caused by a leaky plumbing or toilet. Excess moisture can promote the growth of mold, which can cause serious health problems. You may not see the mold, but it is just there and affects your health.

To solve this problem, running a dehumidifier can help to remove excess moisture from the air in these areas. However, just remember a long-term solution should be found, based on the root of the problem. A dehumidifier is helpful to reduce the humidity but the cause must be found and cannot be neglected.

For people who have found the cause and plan to repair such as repair walls and remove mold, you should choose a paint which is mildew resistant and can seal areas that have been repaired. Or, mold will make a comeback.

Other areas, like garages, closets, storage areas or basements rooms, can have moisture problems because these areas are easy to trap moisture. Mold spots, as well as dripping spots are often found below windows. Rotting casings and faulty window seals can cause these similar problems. To solve these problems, you may need to replace your windows as well as its frames, and change the sheetrock and insulation, making sure all the wet areas can be removed.

3. Musty Odor or Smell

If there is a musty odor in garages, entrances, crawl spaces or basements, it is probably caused by the mold and mildew. This problem may be caused by construction sealing problems, improper door/window seals, and wet basements. If you find musty odor, you can check these problems.

Anytime a musty smell is detected. This means mold is somewhere and it is not healthy for everyone. A dehumidifier is helpful but you also need to find the root problem and find a final solution to prevent from recurring in the future. These mold areas need to be dried.

4. Recurring Spring Water Run-Off Dampness

In some areas, spring ground water dampness is really a recurring problem. And if you have purchased a new home and find grayish or white water level marks in the basement, a dehumidifier is needed to remove the moisture from the air. Plus, you need to investigate the specific reason that why the basement tends to water.

5. Buying a Home? Inpect for Mold, Water Stain Marks

If you plan to buy a RV or home, you should check the possible excess moisture problems which could be a health concern. Once you have found these problems, you should ask why and whether any remedial action was undertaken. If you don’t know how to solve this problem, you can bring in an expert to help you.

Page 2 of 5512345...102030...Last »